When was the singer 185j made?
The Singer model 185K sewing machines were made in the Kilbowie factory in Scotland between 1958 and mid 1963….Technical Details.
| Size | 3/4 Full size (12-1/2″ base) |
|---|---|
| Motor | Singer BAK or BZK-5 (external with V belt) |
| Drive Belt | Simanco Part No. 196386 (15″ – 38cm O.D) |
Where is a singer 185j made?
The Singer model 185K sewing machines were made in the Kilbowie factory in Scotland between 1958 and mid 1963….Technical Details.
| Size | 3/4 Full size (12-1/2″ base) |
|---|---|
| Needle Threading | Left to right |
| Bobbin | Class 66 |
| Work Light | Fitted to rear |
| Finish | Tan/Brown or Green in USA/Canada |
Where is the serial number on a singer 185j?
Serial number is found under the machine. Note: Singer data for the 185 is often mixed up with dating information for the 99.
Why is my sewing machine not catching the bobbin thread?
– Make sure the bobbin is wound evenly and has been inserted into your machine properly. – Check for scratches on the bobbin case. – Make sure that the bobbin thread is pulled completely under the pretension, to assure that the bobbin is wound evenly. – Make sure you are using the correct bobbin in the machine.
How do you thread a Singer sewing machine?
Singer sewing machines have to be threaded in a specific way. Otherwise, you may end up with a thread jam in your stitches, or you may not be able to make stitches at all! Start by getting your sewing machine ready to thread. Then, thread the top portion of your machine. After that, load the bobbin and turn the wheel to catch your thread!
Is your Kenmore sewing machine threaded correctly?
Before you can use your Kenmore sewing machine, you need to make sure that the machine is threaded correctly from both the top and bottom. The threading process is usually pretty straightforward but needs to be done with precision and accuracy.
Where is the tension knob on a Kenmore sewing machine?
Draw the thread down the A path, hooking it into the latch at the bottom of the path, and back up through the B path at the left. For most models from the Kenmore 158 series and 385 series, there will be a tension knob at the bottom of your first thread path.
How do I thread the spool on my Kenmore washing machine?
Wrap the thread around the left side of this guide, drawing it down toward the front of the machine. You should hold the spool stationary with your right hand while threading this part of the machine.