## What is meant by 1 TMC water?

1 tmc ft is one thousand million cubic feet of water. This is 28316.85 million litres of water. If there was 1 tmc ft of water in the dam and this was to be pumped equally, every day for 365 days in a year to the city, 77.58 million litres per day would be available to the city.

## How many cusecs are in TMC?

11,000 cusecs

Cusec is a measure of flow rate of water and is abbreviation for cubic feet per second (which is equivalent to a flow of 28.317 litres per second) and 11,000 cusecs flow for a day amounts to 1 TMC (thousand million cubic feet) water.

**How many Litres is cusec?**

28.317 litres

Answer: 1 Cusec = 28.317 litres For flow rate calculation, Cusec is used and Cusec is equal to cubic feet per second.

**What is QSEC?**

Cusec is a unit of flow (especially of water) that is equal to one cubic foot per second.

### How is TMC calculated?

1 TMC = 10^3 x 10^6 x 28.3164 = 28.3164 x 10^9 litres of Water. I cubic feet of water corresponds to 28 litres approximately.

### How do you calculate dam capacity?

- Surface area. The surface area of a dam is calculated by multiplying the length by the width.
- Volume. With the surface area and depth calculated, the volume can then be determined: volume (m3) = surface area (m2) × max depth (m) × 0.4.
- Gully dams.
- Depth.

**What is Cumec and cusec?**

(i)Cusecs: The discharge of the volume of water flowing in the river is measured over time. When the water is measured in cubic feet per second, it is called cusecs. (ii)Cumecs : When the water flowing in the river is measured in cubic metre per second, it is called cumecs.

**How do you calculate TMC?**

#### What is Cumec and Cusec?

#### What is Cusec and Cumec?

**How is dam capacity calculated?**

**How do you convert cumec to cusec?**

We assume you are converting between cusec and cubic metre/second. You can view more details on each measurement unit: cusec or cubic meter/second The SI derived unit for volume flow rate is the cubic meter/second. 1 cusec is equal to 0.028316847 cubic meter/second.

## How much is 1 TMC?

Tmcft, (Tmc ft), (TMC), (tmc), is the abbreviation of one billion cubic feet (1,000,000,000 = 109 = 1 billion), commonly used in India in reference to volume of water in a reservoir or river flow.

## What is TMC dam?

Thousand Million Cubic feet (TMC or TMC ft) is a measure typically used to refer large volume of water in a reservoir. TMC is often use to indicate the incoming and outgoing water flow in dams. 1 TMC = 1,000,000,000 cubic feet= 109 cubic feet = 1 billion cubic feet.

**How do you convert Cumecs to cusecs?**

1 cubic meter/second is equal to 35.314666212661 cusec. Note that rounding errors may occur, so always check the results.

**How is dam storage capacity calculated?**

The variable St is calculated by the following equation: St = | St-1 + Rt – It | 0 if negative or zero if positive (1.2) The required storage capacity is equal to the maximum of St values. Example 1.1: A reservoir is to be constructed at a location where monthly flow data are available for 28 months.

### How do you calculate water flow in a dam?

To calculate the water flow (in m3) multiply the average water velocity (in m/s) by the average width (in m) and by the average depth (in m). Water flow = 0.425 m/s x 1 m x 0.6 m = 0.255 m3/s. Note: remember that 1 m3 = 1 000 l so multiply by this to convert water flow measurements to litres per second (l/s).

### What is the difference between TMC and MLD?

By TMC; we express volume of large quantity of liquid (like River water) by adding any length unit (usually ft) to it. So, the unit of volume is TMC ft or Thousand Million Cubic ft. By MLD; we express volume flow rate of liquid (usually from any Water Treatment Plant or Municipal Water Supply System).

**How many mega litres are there in 1 TMC ft?**

So, 1 TMC ft = 28316800000 Litres = 28316.8 Mega Litres. We can find relation between one unit of volume and another; but relation between one volume unit and one time rate of volume flow unit can not be found. Crowdfunding real-estate investment targeting 18% return.

**How much is 1 Ml/d equal to 1 ton/d?**

The answer is: 1 mL/d equals 0.0000010 ton/d 0.0000010 ton/d is converted to 1 of what? The tonnes (water mass) per day unit number 0.0000010 ton/d converts to 1 mL/d, one milliliter per day.

#### Why choose TMCC?

TMCC provides students choices: Over 50 programs of study that lead to more than 160 degree, certificate and other completion options, university transfer, convenience, flexible schedules and affordability. Degrees and certificates awarded last year! TMCC’s average class size. Degree and certificate programs to choose from.