What is CT in aeronautics?
Industrial X-ray inspection and computed tomography (CT) provide a view into the inner construction of fiber-reinforced composite materials for the aerospace/defense industries. This enables non-destructive testing during production and maintenance. Composite inspection tasks can include detection of: Delamination.
What are the components elements of flight?
The four forces are lift, thrust, drag, and weight.
What design features allow airplanes flying?
The shape of an airplane’s wings is what makes it possible for the airplane to fly. Airplanes’ wings are curved on top and flatter on the bottom. That shape makes air flow over the top faster than under the bottom. As a result, less air pressure is on top of the wing.
How aircraft designer can built an aerodynamically efficient airplane?
Reducing the lift-to-drag ratio of an aircraft can make it more aerodynamically efficient and help reduce the aircraft’s weight and fuel use. Engineers are experimenting with innovative designs that will help reduce drag. Ideas include thicker fuselages, which increase airflow, and longer, slimmer wings.
How far can a ultralight fly?
With a fuel tank limited to 5 gallons, it can travel no more than 180 miles without refueling. This is a plane for a solo pilot, for flights at dusk, an after-work spin on a calm day, or even a hop to Block Island. The FAA does not allow passengers.
What are the aircraft design constraints?
For most aircraft projects there are several constraints related to field performance (e.g. take-off, climb, balanced field length, stall speed, landing characteristics) and several linked to other mission segments (e.g. minimum cruise speed, climb rates/times, turn rates, specific excess power, loiter speed, dash …
What is aerodynamic design?
Aerodynamic design begins with the wing and airfoil shape, then quickly extends to the full outer surface of the aircraft. Along with designing a smooth, low drag shape, aerodynamic design also includes providing good stability, control, and handling qualities.
What are the stages in airplane design?
The Three Stages of Aircraft Design
- Conceptual Design. The first stage of aircraft design is conceptual design.
- Preliminary Design. After completing the conceptual design, the next phase is preliminary design.
- Detail Design. Last but not least is the detail design phase.
How much runway does an ultralight need?
An ultralight landing area shall have a runway safety area whose length is 300 feet and width is 150 feet.
What is Bernoulli’s principle of flight?
Bernoulli’s principle helps explain that an aircraft can achieve lift because of the shape of its wings. They are shaped so that that air flows faster over the top of the wing and slower underneath. Fast moving air equals low air pressure while slow moving air equals high air pressure.
What is constraint diagram?
Constraint diagrams are a visual notation designed to express logical constraints. Augmenting the diagrams with a reading tree (effectively a partial ordering of quan- tifiers) ensures that each diagram has a unique semantic interpretation.
What is constraint analysis?
Constraint analysis focuses on the bottlenecks within an organization. Under this viewpoint, a manager should only focus on maximizing the utilization of a bottleneck, since the bottleneck controls the overall profitability of the business. Focusing on any other aspect of the business has no impact on profits.
What are the four principles of aerodynamics?
Weight, lift, thrust, and drag are the four principles of aerodynamics. These physics of flight and aircraft structures forces cause an object to travel upwards and downwards, as well as faster and slower.
What is the Flight Design CT2K?
Complying with the different regulations in different countries, the Flight Design CT2K has been developed, and now has less weight, increased power and higher performance, with additional load-carrying capability. The ultraulight plane CT2K from Flight Design now has even greater application for flight training as well as for everyday operation.
What is the take-off weight of the CT2K?
The FlightDesign CT2K is built for the future. The design of the wing and the aircraft structure has been tested for a take-off weight up to 600 kg, so the Flight Design CT2K can comply with different certification criteria in different countries. Visit: www.flightdesign.com
What is the short wing CT2K?
Short Wing version of the CT2K with a shorter wingspan and redesigned wingtips, giving higher cruise speeds while maintaining similar stall speeds. Remained in production in 2017.
What kind of instrumentation does the CT2K have?
The CT2K features an uncluttered instrument panel that leaves room for a few more gauges if you like. The FlyDat panel, which comes on the CT Cruiser, is roughly similar to United States-manufactured electronic instrumentation packages. Small map pockets are available on either side of the panel.