Is EPDM available in white?
With its superior flexibility and high strength, EPDM can easily contour to unusual roof shapes. White on Black EPDM is sold in sheets 10′ wide and up to 100′ long. White on Black EPDM carries a 10 year warranty on membrane only against weatherability and factory defects (chalking not included).
Is EPDM black or white?
WeatherBond White EPDM is a . 060 inch-thick (1.52 mm) roofing membrane, Ethylene Propylene Diene Terpolymer (EPDM) based elastomeric homogenous roof covering. Used for new single-ply roof construction, re-roofing, repair applications, RV Roofs, Mobile Homes, Warehouses, etc. Made in the USA.
What is the difference between TPO and EPDM?
TPO roofing reflects sunlight, allowing commercial air conditioners to work more efficiently; whereas EPDM has a dark surface, which in summer conditions will absorb heat, forcing cooling systems to work overtime. TPO offers reduced cooling costs and energy savings for facilities located in warmer climates.
What color is EPDM?
black
While TPO has a natural white color, EPDM results in a dark gray or black color for your roof. The darker color is not helpful in reflecting UV rays; it does retain heat for those in cooler weather.
What is white rubber roofing called?
GenTite White Rubber Roofing (EPDM – Ethylene Propylene Diene Monomer) is a high quality, commercial-grade rubber membrane that is resistant to weathering, tears, impacts, punctures and light foot traffic.
What thickness of EPDM is best?
An EPDM roof with a thickness of 45 Mils should last around twelve years. If your roof is 90 Mils thick, it might last more than twenty-five years.
Which is better EPDM or PVC?
Comprised of synthetic rubber, an ethylene propylene diene monomer (EPDM) roofing membrane offers superior weather resistance while remaining a cost-effective option. PVC, on the other hand, delivers exceptional seam strength; in fact, heat-welded PVC seams are stronger than the PVC roofing membrane itself.
How long does 60 EPDM last?
EPDM roof membranes remain stable over time and can have a life expectancy of over 50 years.
Can you walk on EPDM?
Full Answer. All of our roofing systems are designed to take foot traffic and will withstand access to the roof for window cleaning and general maintenance The EPDM systems can be walked on both during and after installation, EPDM is designed to take LIGHT foot traffic for occasional cleaning or maintenance.
What are common problems with EPDM roofs?
Common EPDM Roofing Problems
- punctures in, or damage to, the membrane.
- shrinkage.
- incorrectly installed or improper flashing.
- wrinkles extending into roof seams.
What are the dimensions of the JM EPDM Peel&stick flashing?
6″, 9″ or 12″ wide, uncured EPDM with clear release liner and factory applied pressure sensitive tape. JM EPDM Peel & Stick Flashing is a 6″, 9″, and 12″ (30.48 cm) wide, uncured EPDM (ethylene propylene diene monomer) sheet with a diamond texture on the top side with a release liner and a factory laminated, self-adhering EPDM/butyl tape.
What is John Manville accuseam system?
licensed producers. Designed to be used with Johns Manville All Purpose Fasteners and High Load Fasteners. Premier one-step, automated, single-ply membrane seam-fastening system. The High Load AccuSeam System is a premier automated system for mechanically attached seams.
How do you use JM EPDM protective stone mat?
JM EPDM Protective Stone Mat is a nominal 7.0 oz/yd2 (237.34 g/m2) UV-resistant, polypropylene, needle-punched fabric. Use the JM EPDM Protective Stone Mat as a slipsheet between the membrane and the ballast or pavers. 6″ wide, 45 mil strip with factory-applied pressure sensitive tape.
What is the best adhesive for EPDM?
This adhesive can be used to adhered TPO or EPDM membranes in temperatures ranging from 25 degrees and rising. It can easily be sprayed in the field or on vertical surfaces. Use: JM All Season Sprayable Bonding Adhesive is an aerosol bonding adhesive that can be used for TPO and EPDM adhered roofing systems and wall flashings.