How do you use flash in Magic terminal?
. Hex Using Flash Magic
- Select the IC from Select Menu.
- Select the COM Port.
- Select Baud rate from 9600-115200.
- Select None Isp Option.
- Oscillator Freq 12.000000(12Mhz).
- Check the Erase blocks used by Hex file option.
- Browse and Select the hex file.
- Check the Verify After Programming Option.
What is the flash memory for LPC2148?
The LPC2148 microcontroller has 512-kB on-chip FLASH memory as well as 32-kB on-chip SRAM. Also, this microcontroller includes inherent support up to 2kB finish point USB RAM.
How do I program my LPC2148?
Below are the steps for flashing the the ARM LPC2148:
- Select the LPC2148.
- Give the COM port number according to Device Manager (Mine was COM7)
- Give baud rate as 38400.
- Oscillator as 12 Mhz.
- Tick “Erase blocks used by firmware”
- Now select the hex file path.
- Tick verify after programming checkbox.
- And click START.
What is the purpose of flash magic?
Flash Magic is a PC burner tool for programming flash memory based microcontroller using serial or Ethernet protocol built by NXP. This tool helps the developer to easily burn the hex file generated by the embedded software like Keil µvision for 8051 and ARM microcontrollers or MPLAB for PIC microcontrollers.
How many pins is LPC2148?
LPC2148 has two 32-bit General Purpose I/O ports. Out of these 32 pins, 28 pins can be configured as either general purpose input or output. 1 of these 32 pins (P0.
What is pinsel in LPC2148?
PINSEL Register It means that the pin can either act as an Input or Output with no specific functions. There is totally three PINSEL register in LPC2148 Controller in order to control the functions of the Pins in the respective ports.
What are the applications of the LPC2148 microcontroller?
This global ARM7 processor technology has developed so many microcontrollers such as LPC2144, LPC2146, and LPC2148, etc. But LPC2148 microcontroller is the most famous microcontroller which has been currently using in different applications such as in automatic braking systems and mobile phones etc.
How do I download Flash Magic?
Downloading with Flash Magic
- Select COM 3 for the COM Port, specify 7200 as the Baud Rate, and select the 89LPC952 as the Device.
- Enable Erase blocks used by Hex File.
- Select the Hex File, for example: root\C51\EXAMPLES\PHILIPS LPC95x\BLINKY\BLINKY.
What is flash in Magic The Gathering?
Flash is a keyword ability which allows the card it is printed on to be cast at any time you could cast an Instant.
Which port pin of LPC2148 is always output?
LPC2148 has two IO ports namely PORT0 (P0) and PORT1 (P1). These two IO ports are of 32-bit wide and are provided by the 64 pins of the microcontroller. The naming convention of the I/O pins on the LPC2148 Microcontroller is Pa.
How many PLL modules are there in LPC2148?
two PLL modules
There are two PLL modules in the LPC2141/2/4/6/8 microcontroller. The PLL0 is used to generate the CCLK clock (system clock) while the PLL1 has to supply the clock for the USB at the fixed rate of 48 MHz.
How many timers are there in LPC2148?
LPC2148 has two 32-bit timers/counters:Timer0/Counter0 & Timer1/Counter1. LPC2148 Timer has input of peripheral clock (PCLK) or an external clock. It counts the clock from either of these clock sources for its operation. LPC2148 Timer/Counter can generate an interrupt signal at specified time value.