How do you use a Polycom remote?
To pair the remote control with Polycom Studio: Long press the Remote Control Pairing button on the bottom of the USB video bar until the LEDs blink blue in the middle with a notification sound. Long press Mute on the remote control until you hear a notification sound.
How do I control my Polycom camera?
If you zoom in, you can pan or tilt the camera electronically by pressing the arrow buttons. To open or close the privacy shutter on the Polycom EagleEye View camera: >> Move the slider to the right to close the privacy shutter, or to the left to open it.
How do I reset my Polycom HDX 8000?
You can use the “Restore Configuration Button”; It is the Button/Hole that is located below the Power button of the HDX Codec. Just press the button 5-7 seconds, and it will restore to its Default Factory Settings.
How do I connect my Polycom remote to my TV?
Hold down the Remote-Control Pairing button on the bottom of the video bar until the lights blink blue and you hear a sound. Hold down the Mute button on the remote control until you hear a sound. Once successfully paired, the light on the video bar will remain blue for 3 seconds with sound.
What is Polycom remote?
Polycom Studio Remote Control. The Polycom Studio USB video bar provides a low-energy Bluetooth remote control, which automatically pairs with the USB video bar when you turn it on for the first time.
How do I pair my Polycom remote?
How do you reset a Polycom camera?
Procedure
- Unplug the Poly Studio USB video bar to turn it off.
- Find the reset pinhole on the bottom of the USB video bar.
- Use a pin or paperclip to press and hold the reset button and plug in the USB video bar at the same time to turn it on. The Poly Studio USB video bar reboots with pulsing amber LED lights.
How do I sync my Polycom remote?
How do I pair my poly USB studio remote?
How does the Polycom remote control work with HDX?
Using the Virtual Remote Control During normal operation, the Polycom To uch Control uses an IP connection to communicate with the HDX system. If this connection is lost for more than 2 minutes, you might see error messages on the HDX system monitor and the Polycom Touch Control screen.
What is the IP address for Polycom HDX room systems?
—1b11:22ad:333a:444b:5cc5:66d6:e777:88f8 (IPv6 address—include the colons) —2555 (E.164 extension for H.323 or SIP) —stereo.polycom.com (DNS name) User’s Guide for Polycom HDX Room Systems Polycom, Inc. 5 —19782922854 (ISDN or phone number)
How do I adjust the lighting on my Polycom HDX system?
Adjusting for Room Lighting If your system administrator has allowed access to user settings, you can use the backlight control to adjust the bright ness of the video that the main camera sends to the Polycom HDX system.
How many contacts does Polycom HDX support from Office Communicator?
—Move contacts from group to group Changes made to contacts and groups using Office Communicator or Microsoft Lync appear on the Polycom HDX system Favorites screen and in the Favorites group in the directory. Polycom HDX systems support up to 200 contacts and 64 groups from Office Communicator or Microsoft Lync.