How do you adjust a phono cartridge overhang?
If it’s in front of the “X” move the cartridge slightly back in the head shell and start over. If it’s behind the “X” move it slightly forward and start over. Continue doing this until the stylus sits precisely in the “X” and the cantilever when viewed from directly in front, is parallel to the hash marks.
What is the two point cartridge alignment protractor?
2-point protractors are universal protractors for turntable cartridge alignment that can be used with any record player (as long as the slots in the headshell are long enough for the alignment geometry you choose).
How do you use a stylus pressure gauge project?
Simply place the stylus tip on the desired weight, then move the tonearm counterweight forward and backward up the arm until the protractor is level (it is pivoted like a see-saw in the middle). This is an acceptable product, but not one I would rate highly.
How do I use geo fidelity mobile disc?
Simply put GEO-DISC on your platter as you would a record, and align your cartridge using the simple printed graph based on the Baerwald alignment curve. It’s that easy. Nobody with a turntable or vinyl LPs should be without this essential device.
What is VTA on a turntable?
Turntable VTA (Vertical Tracking Angle) is the angle in which the tonearm and stylus meet the record being played. The reason for this angle is two-fold. First, it causes less wear on the stylus by taking off the direct pressure which would occur if the VTA was incorrectly set.
What is cartridge azimuth?
Azimuth refers to the horizontal balance of the cartridge when viewed from the front. This, in turn, determines at which angle the stylus sits on the record groove. The theoretical assumption is that when the Cartridge is perfectly perpendicular to the record groove, the stylus will sit perfectly in the record grooves.
How do I adjust the pressure on my stylus?
Setting stylus pressure is easy. Turn the anti-skating knob to 0. Then rotate the weight on back till the arm is in balance and tends to stay parallel to the base. Next, rotate the loose reticule on the weight till 0 lines up with the mark on the arm.
How does VTA affect sound?
Generally, when the VTA is too great (that is, when the back of the arm is too high), the sound will tend to be slightly hard and steely, excessively “detailed,” and lacking in body. When VTA is too small (with the arm base too low), the sound will be somewhat dull and lifeless and lacking in detail.
What is the Pro-Ject cartridge alignment tool?
Tool for cartridge alignment and adjustment. Special slip-proof tool for defining the turning centre of Pro-Ject tonearms. Adaptable to accommodate differing tonearm lengths.
How do I set up the alignment of the cartridge?
This is a basic tool for setting up the alignment of the cartridge to guarantee optimal tracking on your vinyl record. Simply place the stylus tip on the first point and then to the second point to make sure the cartridge is aligned in parallel (as close as possible) at both points.
What is the Pro-Ject toner tool?
Special slip-proof tool for defining the turning centre of Pro-Ject tonearms. Adaptable to accommodate differing tonearm lengths. Also suitable for other manufacturers’ tonearms.