How do I sync my Polar A300 with app?

Posted on

How do I sync my Polar A300 with app?

Before syncing make sure: You have a Polar account and Flow app….

  1. Sign into Flow app, and on your A300 go to Settings > General settings > Pair and sync > Sync data and press the START button.
  2. Connecting to device is displayed, followed by Connecting to app.
  3. Syncing completed is displayed when you are done.

How do I sync my Polar watch to my app?

In the Polar Flow mobile app for Android there is no automatic synchronization. Every time you want to sync your data, you’ll have to start the app and tap the touch button on your activity tracker to begin the sync.

How do I get my Polar watch to auto sync?

On your watch go to Settings > General settings > Pair and sync > Paired devices. Choose your phone. Remove pairing? is displayed. Confirm by pressing OK.

Why is my Polar watch not syncing?

Make sure that Bluetooth is turned on in your phone settings. Make sure location is enabled for Polar Flow app in the phone’s application settings. On Android 6 and newer devices, location permission is needed to scan for Bluetooth devices. Make sure Flow app is running on your phone and keep it at the foreground.

How do I turn on Bluetooth on my Polar A300?

  1. Go to General Settings > Pair and sync > Pair other device and press START.
  2. A300 starts searching for your scale.
  3. Step on the scale.
  4. Once the scale is found, the device ID Polar scale xxxxxxxx is displayed on your A300.
  5. Press START, Pairing is displayed.
  6. Pairing completed is shown when you are done.

Why won’t my Polar watch connect to my iPhone?

Restart your mobile device and Polar device. To restart your Polar device press and hold the UP, DOWN, BACK and LIGHT buttons simultaneously for five seconds until the Polar animation is shown on the display. Alternatively, go to Settings > General settings > About your watch and choose Restart your watch.

How do I pair my Polar Bluetooth?

Polar Beat is compatible with Polar Bluetooth heart rate sensors: H9, H10 and OH1….To pair a heart rate sensor with Polar Beat app Android

  1. Wear the sensor.
  2. Open Polar Beat app on your Android device.
  3. Go to > Settings > HR sensor. Pair the sensor. ►

How do I sync my Polar phone?

To pair a mobile device:

  1. On your mobile device, open the Polar Flow app and sign in with your Polar account.
  2. On your Polar device, go to Settings > General settings > Pair and sync > Pair and sync mobile device and press START.
  3. Confirm from other device pin xxxxxx is displayed on your Polar device.

How often does polar flow sync?

Your watch automatically syncs with the Polar Flow app once an hour if your phone is within the Bluetooth range. The automatic sync is done also when you finish a training session or change the settings on your watch.

How do I sync my Polar watch to my Iphone?

  1. Sign into the Flow app and on your Polar device go to Settings > General settings > Pair and sync > Pair and sync mobile device and press the START button.
  2. Connecting to device is displayed, followed by Connecting to app.
  3. Syncing completed is displayed when you are done.

Why won’t my Polar watch connect to my Iphone?

How do I pair my Polar A300 to my heart rate monitor?

  1. Go to General Settings > Pair and sync > Pair other device and press START.
  2. When Pairing is displayed, touch the heart rate sensor with your A300.
  3. Pairing completed is displayed when you’re done.

How do I sync my iphone with Polar?

How do I sync my polar loop to my iPhone?

Sync with Flow App Your Polar Loop 2 syncs the data automatically to the Polar Flow app for iOS, when you reach your daily activity goal, when you get an inactivity alert and after you’ve stopped training with a heart rate sensor. You can also sync your data any time by tapping the touch button of your Polar Loop 2 .

How do you refresh the Polar app?

Switch Bluetooth off and on from your mobile device. Restart your mobile device and Polar device. To restart your Polar device press and hold the UP, DOWN, BACK and LIGHT buttons simultaneously for five seconds until the Polar animation is shown on the display.

How do I Sync my Polar A300 with my computer?

Go to flow.polar.com/start, and download and install it before trying to sync. Plug your A300 to your computer either directly or with the USB cable. Make sure FlowSync software is running. The FlowSync window opens on your computer, and the syncing starts. Completed is displayed when you are done.

How do I Sync My data to my Polar device?

There are two ways to sync your data: 1 Sign into the Flow app and press and hold the BACK button on your Polar device. 2 Connecting to device is displayed, followed by Connecting to app. 3 Syncing completed is displayed when you are done.

How do I download and install polar flowsync for Mac?

Go to flow.polar.com/start. Click Download for Mac. FlowSync starts downloading the installation… Polar FlowSync log file location A FlowSync log file is needed for investigating data synchronization problems. Which products are compatible with Polar FlowSync software?

What devices are compatible with polar Flow app for Android?

Polar Flow mobile app for Android is compatible with devices running Android 4.3 or later. For support and more information about using Polar Flow app, go to www.polar.com/en/support/Flow_app. Before taking a new mobile device (smartphone, tablet) into use, it has to be paired with your A300.