How do I program my rcr312w?
Press and hold the component key (TV, VCR•DVD, SAT•CBL) you wish to program. The illuminated ON•OFF key turns on and remains on. Tip: To exit without saving at any point in the Auto Code Search, press and release the GO BACK key. 1.
What are the RCA TV codes?
Universal Remote Control Code List For RCA Remote Controls
- Abex TV 1172.
- Admiral TV 1001 , 1046 , 1047 , 1083 , 1095 , 1173 , 1191 , 1211.
- Admiral VCR 2001.
- Advent TV 1005 , 1062 , 1219 , 1238 , 1291.
- Adventura TV 1174.
- Adventura VCR 2026.
- Aiko TV 1016.
- Aiko VCR 2027.
What is the code for a RCA universal remote?
The TV codes are: 000, 006, 011, 019, 027, 034, 038 and 044. The VCR codes are: 000, 005, 007, 008, 028 035, 037, 054 and 069. The cable box codes are: 000 and 027.
How do I program my RCA rc27a remote?
Use the number pad in the center of the remote to enter in the first three-digit code on the list for your television. Do not hold any number down while pressing it and pause briefly between each number. When finished, press the “OK” button to save the code. The indicator light will turn off if the code is recognized.
How do I find my RCA TV code?
If your remote has a Code Search button, the easiest way to pair devices is by directly entering the device codes. Find the device code for the equipment you want to control. You can find this code in your remote’s manual or use the RCA remote code finder. Power on the equipment you want to pair.
How do I program a RCA universal remote to my TV with code?
Press and hold the Code Search button on the remote. While still holding the Code Search Button, press the button on the universal remote that matches the equipment you’re pairing (e.g. if it’s a sweet new smart TV, press the key for TV). The light on the remote will blink once and then stay steady.
How do I connect my RCA universal remote to my TV?
Aim your remote at the TV panel and press and hold the ‘TV’ button on your RCA universal remote. Once the light is turned on, at the same time, press and hold the ‘On/Off’ and ‘TV’ buttons until the light turns on again. Press and hold the ‘Play’ or ‘Slow’ button on your RCA remote for five seconds.
How do I program my RCA universal remote without a code search?
If your RCA universal remote does not have a Code Search button
- Power on the equipment you want to control.
- Press and hold the button on the universal remote that matches the device you’re pairing (e.g. if it’s a DVD player, press the DVD button).