How do I know if my Roomba battery needs replacing?
Roomba indication lights and what they mean
- Solid Red – the Roomba battery is completely empty and needs to be recharged.
- Flashing Red – the Roomba battery is too low on power and a cleaning cycle cannot be started.
- Solid Green – the Roomba battery is fully charged and is ready for use.
How do you fix a dead Roomba battery?
Perform a manual reconditioning every few months. Remove the battery and hold down the power button on the Roomba for five to 15 seconds. This resets the Roomba.
How do I fix a charging error 5?
Clean the Contacts of the Battery and Terminals You may encounter the Roomba robot charging error 5 if the terminals of the battery or dock have accumulated carbon (or dust) over them. In this context, cleaning the contacts of the battery and dock terminals may solve the problem.
Is Roomba battery replaceable?
Loosen the five (5) screws that retain the bottom cover with a cross head screwdriver. Unclip the original battery to remove it from the robot. Insert the replacement battery in the battery well. The battery tab will secure it into place.
Why is my Roomba battery not charging?
If your Roomba is not charging, clean the charging ports with a soft cloth and some rubbing alcohol to remove dust, hair, or gunk accumulation. You may also have to reinstall or replace your battery or charging dock or even reset the Roomba to factory settings.
What does calibrating a battery do?
Answer. Battery Calibration is a built-in battery software. Calibrating the battery helps to reset the battery power setting. It can be done with a single click.
Why does my Roomba keep saying error 5?
Error five (5) means the left wheel cannot turn. Please check the following: If Roomba® is stuck under an obstacle, move it to a new location and press CLEAN to restart.
What is charging error 5 on a Roomba?
You may encounter the Roomba robot charging error 5 if the terminals of the battery or dock have accumulated carbon (or dust) over them. In this context, cleaning the contacts of the battery and dock terminals may solve the problem.
Why does my Roomba say battery is not working?
This error message is triggered when your Roomba battery fails to communicate with the Lithium-Ion battery. It will vary depending on the Roomba model you are using. To avoid encountering this error, make sure you are not using a counterfeit iRobot battery. Always use authentic batteries.
Why does my Roomba Keep Sending Me error 17?
However, if you get this message even when you have placed Roomba on a flat surface, you should consider a reboot. Your Roomba can self-navigate your apartment. However, it might encounter unknown territory from time to time. If it does, it will inform you of it by sending the Roomba Error 17. Moreover, it will also stop the cleaning process.
How do I reset the battery in my Roomba?
If your battery no longer has the same performance before it is possible that your problem has a solution without the need to change the battery. 1 Perform a Roomba battery reset. Hold for 10 seconds the “spot” and “dock” which are located above and below the “clean” button buttons
How do I fix error 11 on my Roomba?
Roomba Error 11: Replace Vacuum. Your Roomba cleaner comes with a powerful motor to suck in all the dirt. If the motor on your cleaner stops working, you will get the Error 11 message. You might need to replace the motor to fix your Roomba. In this instance, we recommend you contact the iRobot customer care to order a new vacuum motor.