Can I replace U-joints myself?
Replacing these joints is a fairly straightforward job, though it takes some prior experience. To begin, you’ll need a universal joint pressing tool. You can also take advantage of the loaner tools program at your local Advance Auto Parts store. Then follow these step-by-step instructions on how to change U joints.
How much does it cost to replace both U-joints?
The u-joint replacement cost is estimated between $225 and $300. Labor makes up about $100 to $125, while the parts should be between $125 and $200. However, these prices vary based on what make and model vehicle you drive.
How long does it take to replace U-joints in a truck?
On a typical labor book, a U-joint replacement is one or two labor hours, meaning that a $25 part can cost substantially more once someone else installs it for you and charges around $100/hour.
How long should U-joints last?
forever
U-joints should last forever – or at least the life of the vehicle.
What are the symptoms of a failing u-joint?
Signs of a Loose U-Joint
- Clunking/clanking noise when you shift gears.
- Vibration when accelerating or decelerating.
- Loud metal-on-metal banging (this is a sign that the u-joint will completely fail very soon)
How many miles are U-joints good for?
In most cases, you have to grease your u-joints every 5,000 miles or so. When you fail to service your u-joints on a regular basis, they will fail. You don’t have to worry about this problem with maintenance free u-joints.
What does a failing u-joint sound like?
Common signs of a faulty u-joint include a squeaking noise, clunking sound when shifting, vibrations in the car, and transmission fluid leaking.
Should I replace both U-joints?
So when you need to replace a u-joint, always replace the other one too. If you don’t, the other one will fail sooner or later. The failure of that u-joint will cause damage to the new u-joint (that replaced the first one). It’s always better to replace both u-joints at once.
How to replace a U joint on a Chevy Silverado?
How to Replace a U Joint in a Chevy Silverado. Lay the drive shaft on a bench with a vise. Remove the U-joint’s snap rings from the yokes with a small set of pliers. Place the U-joint within the vise’s jaws. Insert a large wrench socket in one end of the joint and a small one at the other end. Close the vise’s jaws around the joint.
How do you tighten the drive shaft on a Chevy Silverado?
Slide the drive shaft’s front end back into the Silverado’s transmission or transfer case (after removing the bag) and tighten the fasteners with your fingers. Raise the center support bearing (for a two-piece shaft) into place and tighten the nuts with a wrench.
How do you use a U joint with a vise?
Place the U-joint within the vise’s jaws. Insert a large wrench socket in one end of the joint and a small one at the other end. Close the vise’s jaws around the joint. The small socket will push out the joint’s cross with the large socket catching it.