Why is my Fisher and Paykel dishwasher not working?
Ensure the dishwasher is plugged in and the power supply is turned on at the wall. Ensure the door is firmly closed. Ensure water is connected and turned on. Check the strainer and clean if necessary, it is located where the water inlet hose screws into the tap.
How do I reset my Fisher and Paykel DishDrawer?
Reset Procedures for the Fisher & Paykel Dishwasher
- Press and hold the button decorated with the key and lock image for five seconds.
- Press the power button to turn off power to the Fisher & Paykel dishwasher.
- Wait a few minutes and then press the power button to restore power.
Why is my DishDrawer beeping?
Drawer cannot drain. The drainage hose may be blocked or kinked, or the connection to drainage pipe may be blocked. Ensure the drainage hose and connection to pipes are not blocked. once to stop the beeping, and then again to clear the fault.
How do I fix the F5 on my Fisher and Paykel dishwasher?
Fisher and Paykel Dishwasher Dishdrawer Error Code F5 Error Code Cause: Lid Error. How To Fix: Turn power to DishDrawer off then turn on power supply. This may reset error. If not the Lid lock switch needs to be checked.
Why does my Fisher and Paykel washing machine keep beeping?
Your machine is checking that the water has drained before spinning. Your washer will beep if you have used ‘No Spin’ and at the end of the cycle. If your machine is beeping continuously or giving a musical series of beeps, refer to the ‘Before you call for service’ section.
What does F1 mean on Fisher and Paykel dishwasher?
The F1 fault code indicates that water has filled the flood pan beneath the bottom drawer of the machine. This can happen if the drawer isn’t shut all the way, something tall prevents the unit from sealing properly during washing or the actuators have failed.
What is F5 error in dishwasher?
The F5 error means inadequate inlet or outlet water supply. Read it again – inlet or outlet! Inlet: – Check that the water pressure is good (I get to know IFB expects more than normal water inlet pressure). – People at top floor should cross check water pressure before buying IFB.