What is Jumbo Tex used for?
Jumbo Tex® addresses the requirements for weather-resistive barriers, while exceeding all standards for Grade “D” Building Paper. An asphalt saturated kraft paper, this cost-effective solution offers solid durability that resists tears and punctures on the jobsite.
What is 2 ply building paper?
TWO PLY building paper is a weather-resistent barrier designed to provide excellent secondary protection behind exterior cladding to prevent moisture penetration and condensation in exterior wall assemblies.
How do I install jumbo Tex?
Fasten all A corners The size of fasteners used and the spacing required is determined on the job site. Apply enough fasteners to hold • Jumbo Tex in place until final cladding is applied a Begin roll a minimum of 6″ away. from corner Install Jumbo Tex directly to studs or over an approved exterior sheath- ing.
What is 60 min building paper?
60 Minute Paper: 60 minute paper is one of the thickest papers available and if using a two ply roll, it is very tear resistant and adds some serious water protection over a 10 minute paper.
Which is better tar paper or Tyvek?
Both Tyvek and tar paper make great water barrier options, but they have advantages and disadvantages that set them apart from each other. Tyvek offers more permeability but less longevity, and you find it near the exterior siding. Tar paper withstands high moisture levels, but it can crack in freezing temperatures.
Can you use tar paper for house wrap?
Tar paper is a less effective air barrier because you don’t seal its seams with tape. Nick, While that may be true, no one should be depending on housewrap to be an air barrier. The purpose of the asphalt felt (or the housewrap) is to be a barrier to rain that gets past the siding.
Which house wrap is best?
Originally, asphalt-laden felt paper was thought to be the best type of house wrap on the market. In fact, it’s still available, along with other house wrap solutions. However, Dupont’s Tyvek HomeWrap® is considered by most in the building profession to be the industry leader.
How do you install Moistop?
Cut a strip of Moistop E-Z Seal for the head (F) of the window extending beyond the jamb flashing already in place. Place the Moistop E-Z Seal on top of the flange (D) of the window with the adhesive strip overlaying the flange and seal by applying pressure along the strip.
Do you staple Tyvek?
It can be installed behind exterior claddings such as stucco, stone veneer, brick, wood and fiber cement lap siding, or metal panel systems. Tyvek Rainscreen is easy to install with 1/2″ staples or nails.
What’s better tar paper or Tyvek?
What is better than tar paper?
Synthetic underlayment is much more tear-resistant when exposed to high winds and foot traffic than asphalt felt underlayment. Since synthetics do not absorb moisture, they are resistant to fungal growth and are wrinkle-free. Synthetic underlayments are ultraviolet (UV) resistant for between six and twelve months.
What is the difference between Tyvek and house wrap?
Typar® Building Wraps has a lower perm rating compared to Tyvek® HomeWrap®; so, a wall covered with Typar® can take longer to dry, which increases the risk of mold, mildew, and rot. Tyvek® HomeWrap® has a drainage plane so can manage bulk water better than Typar® Building Wrap, that does not have a drainage plane.