What is a 25Q?
Army Multichannel Transmission Systems Operator-Maintainer (MOS 25Q) operates and maintains equipment that communicates through more than one channel. Soldiers in this Army MOS complete troubleshooting and repairs on any assigned multi-channel transmission system.
How many users can a CPN support?
Each cellular support capability will support 32 simultaneous users (threshold), 48 simultaneous users (objective). The system will be capable of providing the full cellular capability in 10 MHz of spectrum (3G) and 20 MHz (4G LTE).
What is a Jnn army?
For military communications, the Joint Network Node system, or JNN as it is commonly called, is a communications system the United States Military uses for remote, satellite-based communication. It is described by General Dynamics and the US Army Signal School as “the next generation of battlefield communications.”
What is Army Upper TI?
The upper TI consists of portions of the Army Tactical Command and Control Systems (ATCCS): the Maneuver Control System (MCS), the Advanced Field Artillery Tactical Data System (AFATDS), the All-Source Analysis System (ASAS), and the Combat Service Support Control System (CSSCS).
What is a 25W in the Army?
Duties of MOS 25W It is a crucial role in the Army’s telecom sector. These soldiers do everything from planning, coordinating, configuring and supervising Army telecommunications to maintain, operate and install telecom networks.
How long is AIT for 25Q?
20 weeks
Job training for a multichannel transmission systems operator-maintainer requires 10 weeks of Basic Combat Training and 20 weeks of Advanced Individual Training with on-the-job instruction.
What is a colorless network?
“The reason it is called ‘colorless’ is that the Army often places color codes on certain security enclaves, with secret typically being designated as red and unclassified as black,” Kantonides said. “In the colorless core, since you can’t see the information, you don’t know what color it is.
What is a snap terminal army?
The SIPR/NIPR Access Point (SNAP) terminals are Very Small Aperture Terminals (VSATs) using commercial-off-the-shelf (COTS) equipment to provide secure beyond line of sight (BLOS) communications to battalions and below.
What does a Hclos do?
When integrated within WIN-T Increment One, High Capacity Line-of-Sight (HCLOS) radios combine communications within a user’s sight range or line-of-sight, or those that expand beyond their line-of-sight. Radios are a necessity for the Army in both Iraq and Afghanistan.
How much does an STT weigh?
Cooper Discoverer STT PRO Tire Specs Chart
| Size | Diameter | Weight |
|---|---|---|
| LT 32X11.50R15 113Q C RWL | 31.57″ | 53 lbs |
| LT 33X12.50R15 108Q C RWL | 32.72″ | 60 lbs |
| LT 35X12.50R15 113Q C RWL | 34.57″ | 67 lbs |
| LT 215/85R16 115/112Q E BSW | 30.59″ | 42 lbs |
What is lower Ti Army?
The lower TI is the communications support system for units found at brigade and below and is composed of the FBCB2 computers and software, EPLRS, and SINCGARS SIP radios networked together using routers and commercial and military protocols.
What is tactical network?
Tactical networking facilitates information sharing and data exchange among military tactical force units to enhance operational processes and situational awareness.
What is a BNC (bi-NCN)?
The BNC was originally designed for military use and has gained wide acceptance in video and RF applications to 2 GHz. The BNC uses an outer conductor with slots and some plastic dielectric on each gender connector.
Who invented the BNC connector?
The basis for the development of the BNC connector was largely the work of Octavio M. Salati, a graduate of the Moore School of Electrical Engineering of the University of Pennsylvania. In 1945, while working at Hazeltine Electronics Corporation, he filed a patent for a connector for coaxial cables that would minimize wave reflection/loss.
What is BNC (Bayonet Neill-Concelman) connector?
The BNC (Bayonet Neill–Concelman) connector is a miniature quick connect/disconnect radio frequency connector used for coaxial cable .
What is the specification for a BNC connector?
Interface specification The interface specifications for the BNC and many other connectors are referenced in MIL-STD-348. It features two bayonet lugs on the female connector; mating is fully achieved with a quarter turn of the coupling nut.
https://www.youtube.com/watch?v=T5ssH5Psygw