Is Blue essence made by Hayward?
Suitable Blue Essence Replacements Hayward Replacement CellsDirect replacements for older Blue Essence salt cells, made by Hayward.
How do you reset a blue essence salt and chlorine generator?
To reset, move the switch to ‘Off’ and then back to ‘Auto’. Wait for the relay to click (5 to 10 seconds). When the instant salt level is stable (and the negative sign still present), slide switch to ‘Super Chlorinate’ and back to ‘Auto’. It takes about 30 seconds for the unit to settle back on the default reading.
How long does a salt system last?
Generally, a salt cell lasts for about 10,000 hours, which is usually around five years for most home pool owners. If your cell is close to or exceeds the 10,000-hour mark, and you notice any of the above signs, it could very well need replacement.
How does Hayward salt cell work?
After a salt system is installed and the proper amount of salt is added to the pool, water begins to flow through the salt cell when the pump is turned on. Power is then applied to the salt cell, and electrolytic plates within the cell convert chloride ions into chlorine gas.
How do I know if my salt cell is bad?
If the salt cell bubbles, but only a little bit, then you probably have a bad cell. It is still a good idea to call a pool professional to confirm this diagnosis. If the salt cell bubbles vigorously, then it is working fine.
Why is my salt generator not producing chlorine?
Chlorine generators need salt to produce chlorine and can’t do so if the amount of salt in the water is too low. The desired salinity level in a saltwater pool is between 2,500 and 3,500 ppm. Get a salt-testing kit from a pool supplier and check to make sure that the levels are within this range.
How can I tell if my salt cell is bad?
How many hours a day should I run my saltwater pool pump?
The pool pump in a saltwater pool should be run 8 to 12 hours per day on average. In saltwater pools, the pump needs to be on for two reasons. The first is to filter the water. The pump should complete at least one turnover of the pool water to filter it properly.
How long should a Hayward salt cell last?
about five years
This is all possible thanks to your pool’s salt chlorine generator cell. With proper care, a cell will last about five years. Eventually, though, it will need to be replaced.
How often do salt cells need to be cleaned?
Most salt cells will need cleaning at least twice a year. Some may need it as often as every two months. It mostly depends on how hard your water is, as that’s what causes buildups. Check on it every two months to see if it needs cleaning until you figure out how often yours will need to be cleaned.
How do you know if salt chlorinator is not working?
Test the water that water has just left the chlorinator – it should have a very high chlorine reading. (Remember that if it is extremely high it may bleach the test tablet so you may have to dilute the water you are testing). If there is no chlorine reading, the chlorinator will not be working.