How do you reset the toner on a Brother HL 2140?

Table of Contents

Step 4: Resetting the Printer

1.To do that, turn off your printer and open the front access panel.
Press and hold the white button, while turning on the printer.
Release the white button and press it again twice.
Release, pause and press again five times.

How do I override my Brother toner life ending?

To reset the ‘Toner Life End’/’Replace Toner’ message on Brother MFC monochrome (black and white) printers:

Open the door and press the Clear/Back key.
Press *00.
Press OK.
Do not choose anything for drum replacement. When the drum replacement menu comes up, press * and then 00, then press OK.

Why won’t my Brother printer recognize the toner cartridge?

If you install a partially used toner cartridge, your Brother machine is unable to recognize toner consumption correctly which will cause this problem. Therefore, when you replace the toner cartridge, please use a brand new toner cartridge, not a partially used toner cartridge from another machine.

Can I use non Brother toner in my Brother printer?

No, you must use the ink the printer needs.

Can I use off brand toner in my Brother printer?

So in the end, the answer is commonly yes for generic. However, it isn’t always the case. Some printers that require chips in their cartridges to work, don’t always allow for generic brands and will refuse to work until you put a legit cartridge in. Thankfully, this is becoming less common, but the risk is there.

How do I reset my Brother HL 2040 printer?

Turn the printer off and hold the ‘go’ button while turning the printer on. Release the ‘go’ button after the three lights are lit. Press the ‘go’ button twice. Once the lights are on solid, press the ‘go’ button five more times.

Where is the go button on a Brother printer?

Using the printer driver It is in the General tab of the Windows® printer driver.

How can I bypass my Brother toner not detected?

Turn off the power and unplug the printer from the outlet and let it sit for 10 or so minutes. Plug it back in and re-insert the cartridge. Turn the power back on and this should work and your new cartridge should work!

Is it OK to buy off brand toner?

It’s important to note that compatible and aftermarket cartridges are different from counterfeit cartridges that are labeled as OEM products but are actually fraudulent. As long as your third-party ink cartridges are labeled as such, they’re totally legal to buy and use.

How do you reset brother printer toner?

How do you reset the toner on a Brother printer? To reset the ‘Toner Life End’ / ‘Replace Toner’ message on Brother DCP, MFC and HL colour printers: With the printer powered on, open the toner access door. Press the ‘Clear/Back’ button to get to the ‘Reset Menu’ At the Reset Menu you can then scroll through the reset options for your printer’s toner cartridges.

How to change brother printer toner?

After replacing a toner cartridge,DO NOT turn off the machine or open the top cover until the machine’s display returns to Ready Mode.

The toner cartridge that comes with your Brother machine is a Starter toner cartridge.

We recommend keeping a new toner cartridge ready for use when you see the Toner Low warning.

How to fix replace toner error on Brother printer?

Power on the Brother printer.

Open the toner access door located at the front of the printer.

Press the “Clear/Back” button.

Scroll through the list of toner cartridges until you have located the one that is giving the “Replace Toner” message.

Press the “1” button to reset the toner cartridge display.

Press the “Clear/Back” button.

How do you reset your brother printer?

Reset Brother Printer TonerMethod 1: 1. Turn the Brother printer off and then wait for a 1 minutes. 2. Open your printer’s cover by either lifting it