How do you change a Franke Triflow valve?
Franke Triflow Doric Handle & Valve Changing Guide
- Turn off the water supplies to the mixer tap.
- Remove Boss A.
- The Vernier Insert B may be left inside the Boss A or remain on the Valve C.
- Please go to stage 7 if replacing the Vernier Insert B only.
- Unscrew Valve C using a 17mm or adjustable spanner.
Why does my mixer tap leak at the base?
There are a couple of primary reasons why a tap may leak at the base. The first reason is that there might be dirt or another build-up that has unseated the washer meaning that the tap is no longer watertight. Another possible cause might be that one of these washers (O-rings) has broken and needs replacing.
How do you fix a dripping Franke Triflow tap?
If your Franke Triflow Kubus Tap is dripping from the Spout then you need to replace the valves. Your Franke Triflow Kubus Tap or Franke Filterflow Kubus Tap takes 3 valves (1 hot and 2 cold). The Triflow version was discontinued Spring 2011 and replaced by the Filterflow version.
Can a leaky mixer tap be fixed?
Repairing a leaking mixer tap is actually a very simple DIY job that anyone can perform regardless of experience level, and the sooner you get onto it, the less water and money you’ll lose down the drain thanks to things such as poor water pressure.
How do I change the valves on a Franke Triflow tap?
How do I remove the Franke Olympus tap handle?
How to I remove the Franke Olympus tap handle? Use 2mm allen key to undo handle. The grub screw is located on the underside of the handle. You can pull the lever forwards to access the screw at the back if you need more space. How do I know if need the adaptor bush?
Are there any spare parts for a leaking or dripping Olympus tap?
Franke Olympus Spare Parts to repair your leaking or dripping tap. *This ceramic cartridge is NOT compatible with the Olympus Triflow and Trispray which were discontinued in 2011. For those taps you need our Q254LC model.
What is the code for the Franke Olympus antisplasher?
If you require a new antisplasher this is our part SR63C/CB (available in Chrome or brushed) Original codes known by 133.0068.762 SP1263 /1263R your original part may have Neoperl stamped around the edge. How to I remove the Franke Olympus tap handle? Use 2mm allen key to undo handle. The grub screw is located on the underside of the handle.
How do I contact Franke for appliance servicing?
For Franke Appliances, Hoods & Waste Disposal Unit servicing please contact: FRANKE Telephone: 0161 436 6280 (Calls charged at your network’s standard rate) Email: [email protected]