How do I set up vManage?

Table of Contents

Startup Configuration vmanage login: admin Password: Welcome to Viptela CLI admin connected from 127.0. 0.1 using console on vmanage You must set an initial admin password. Password: Re-enter password: The first time you log in you get a message that you have to select a storage device.

How many vEdge devices can a vManage manage within a single domain?

2000 Cisco vEdge devices
A single Cisco vManage instance can manage a maximum of about 2000 Cisco vEdge devices .

What is vManage used for?

vManage can be used to control the level of trust afforded to a device and how much it will be able to participate in the fabric based on that level of trust.

How do I add a device to vManage?

Add a vSmart Controller

In the Controllers tab, click the Add Controller drop-down and select vSmart.
In the Add vSmart window: Enter the system IP address of the vSmart controller.
Repeat Steps 1 and 2 to add additional vSmart controllers. The vManage NMS can support up to 20 vSmart controllers in the network.

How do I reset my vManage password?

To recover, login to root user and clear the admin user, then attempt login again. Cisco TAC can assist with the login of root user. To recover, login to root user and clear the admin user, then attempt login again. Cisco TAC can assist with the login of root user.

Will SD-WAN replace MPLS?

Yes! SD-WAN provides similar performance and reliability to a dedicated MPLS circuit. However, it accomplishes this by aggregating various transport media and optimizing traffic routing rather than relying upon predefined, dedicated links.

What happens if vManage goes down?

If the active vManage NMS goes down unexpectedly, or you simulate a vManage going down in a lab environment, restore the most recent copy of the configuration database to the standby vManage NMS. In this scenario, the active vManage(s) NMS goes down, or the data center hosting them goes down.

What is vBond vManage and vSmart?

vBond – initiates the bring up process of every vEdge device, at the first step it creates secure tunnel with vEdge and informs vSmart and vManage about its parameters like for instance ip address. It has to be fully connected with every device.

What is Cisco plug and play?

Introduction The Cisco® Plug and Play solution is a converged solution that provides a highly secure, scalable, seamless, and unified zero-touch deployment experience. Enterprises incur major operating costs to install and deploy networking devices as part of campus and branch deployments.

How does Cisco SD-WAN work?

Cisco SD-WAN provides advanced analytics, monitoring, and automation for any connection across your network, whether MPLS or beyond the cloud edge. With Cisco SD-WAN, you can help ensure that users enjoy optimal speeds and the best performance from the applications they need for success.

How do I change from vManage mode to CLI mode?

Switching device to CLI mode via vManage Navigate to Configuration > Devices. Click on the Change Mode drop-down menu and select CLI mode.

What is vSmart controller?

The vSmart Controller is a virtual appliance that exists either within a public or private(on-prem) cloud. It provides the control plane for the network fabric, facilitates the data plane encryption between WAN edges, and propagates the centralized policies that establish and direct the fabric.

How do I turn off vManage interface?

vManage Shutdown Interface for Troubleshooting

In vManage NMS, select the Tools ► Operational Commands screen.
In the right pane, click the device.
Click the More Actions icon to the right of the row.
From the drop-down list of commands, select Interface Reset.
From the Interface Reset box, select the desired interface.

Is SD-WAN better than MPLS?

MPLS can have steep bandwidth costs, while SD-WAN protects your network from vulnerabilities that MPLS cannot. The short answer is that SD-WAN offers better visibility, availability, enhanced performance, and more freedom of action. It’s why the industry has seen interest in SD-WAN rising over the past few years.

What is the difference between meraki and Viptela?

Whereas Meraki combines all aspects of SD WAN configuration, monitoring and management into a single cloud-based controller, Viptela uses a different architecture that dedicates certain functions to individual appliances. This allows for greater scale and expandability.

Is SD-WAN better than VPN?

Reliability of SD-WAN vs. VPN. Both SD-WAN and VPN are very secure systems, however, SD-WAN offers a failover security feature that VPN does not. SD-WAN automatically fixes a service failure or outage by taking control of your IP address and transferring it from one network to another.

Why is SD-WAN cheaper than MPLS?

SD-WAN reduces costs by providing optimized, multi-point connectivity using distributed, private data traffic exchange and control points to give your users secure, local access to the services they need – whether from the network or the cloud – while securing direct access to cloud and internet resources.

How do I change the device in vmanage mode?

When you attach a template to a device from vManage, it puts the device in vManage mode. You can change the device back to CLI mode if needed to make local changes to its configuration. In WAN Edge List tab, select a device. Click the Change Mode drop-down and select CLI mode.

How do I configure Cisco vmanage to work with a new controller?

In the Attach Devices dialog box, add the new controller to the Selected Device list and click Attach . Verify the Config Preview and click Configure Devices . Cisco vManage pushes the configuration from the template to the new controller. In the Configuration > Devices page, Mode reads vManage .

How do I toggle a controller from vmanage to CLI mode?

To toggle a controller device from vManage mode to CLI mode: In the Controllers tab, select a device. Click the Change Mode drop-down. Select CLI mode and then select the device type. The Change Mode CLI window opens.

What are Cisco vmanage feature templates?

Feature templates are the building blocks of complete configuration for a device. For each feature that you can enable on a device, Cisco vManage provides a template form that you fill out. The form allows you to set the values for all configurable parameters for that feature.