How do I convert my headlights to LED lights?

Table of Contents

How to Convert Your Headlight Bulbs to LED

Step 1: Find Your Headlight Bulb Type.
Step 2: Purchase an LED Conversion Kit.
Step 3: Unboxing Your LED Conversion Kit.
Step 4: Take Some Photos.
Step 5: Locate Your Headlight Bulbs.
Step 6: Remove Your Halogen Bulbs.
Step 7: Install the LED Bulbs.
Step 8: Connect the LED Ballast.

Can I use LED bulbs for high beams?

To put it simply, yes. LEDs can be used in reflector headlights BUT (and it’s a big but) if you’re upgrading the bulb, you also need to upgrade the reflector bowl. Failure to do so can blind or dazzle other people.

Can you replace stock headlight bulbs with LED?

LEDs have a few advantages over halogens. They’re brighter but consume less power, don’t heat up as much, and take up less space. However, you can’t simply replace a halogen bulb with an LED assembly.

Do LED headlights need load resistors?

Headlight LED load resistors prevent “bulb out” error messages and bulb flickering. These 6 ohm 50-watt load resistors compensate for the low power draw of 9005 LED bulbs so that they can communicate properly with your vehicle’s computer system.

How much does an LED headlight conversion cost?

$44 kit converts your car’s headlights to LEDs in about 15 minutes.

Do LED headlights need a ballast?

No LED bulbs require a ballast, although some are engineered to work with an existing ballast. You will find ballast-compatible or “plug-and-play” LEDs that are designed to replace linear fluorescents, compact fluorescents, or HIDs. Incandescent and halogen lamps do not require a ballast.

What relay do I need for LED headlights?

You shouldn’t need to use a relay for LED conversion. They do not pull any more juice than the standard bulbs. It’s recommended for HID conversions since they pull a lot of current when they ignite, and they often cause voltage spikes/fluctuations.

Do I need conversion kit for LED headlights?

The bottom line is, if you’re making the change from outdated, under performing Halogen bulbs to newer, brighter HID or LED bulbs, you’ll need a conversion kit to ensure the new bulbs fit correctly.

What are sealed beam conversion headlights?

Sealed beam conversion headlights allow replacing sealed beam headlight with the assemblies feature a halogen bulb and allow replacing the bulb and keeping the same assembly. Quality sealed beam conversion lights do not require any modifications to the headlight or vehicle wiring.

Can you convert sealed headlights to halogen headlights?

Many older vehicles came equipped with sealed headlights. Such lights do not allow replacing the bulb only. So whenever the bulb is out, the car owner has to replace the whole assembly. This makes the bulb replacement quite time and money-consuming. So no wonder many car owners decide to convert their sealed beams to halogen bulbs.

What are the dimensions of the LED headlight conversion?

Headlight Conversion, 7 in. Crystal, 10 Amber LED Auxiliary Lights, H6017, H6024, Each Headlight, Conversion, Round, 5.75 in. Diameter, Each

Do I need to change the headlight assembly for conversion headlights?

Quality sealed beam conversion lights do not require any modifications to the headlight or vehicle wiring. To install conversion headlights instead of the OE sealed beams you will just need to remove the original assemblies and install the new lights that you select.