How can I make my violin sound better when recording?
Position it out and up from the instrument. Point it toward the area where the bow plays. Large diaphragm condenser microphones (in a cardioid pattern) generally sound good on violins, violas, and cellos alike. A close ribbon mic sounds great in combination with a small or large diaphragm mic (at more of a distance).
Should violin compress?
You don’t generally need a lot of compression on acoustic stringed instruments, especially if you want a natural sound. You can use the compressor to even out the resonance of the instrument to keep the main character of the instrument from getting lost in a mix and to avoid a muddy sound.
How do you mic a violin for live performance?
Most experienced violinists would recommend placing the microphone to a position that you are comfortable with that will not cause any hindrance to the performance while getting the best possible sound. Putting it on top of the chin-rest just above the bow/string area is a good option.
How can I make my violin sound thicker?
By adding more weight to the bow with your index finger and more speed from your arm, the instrument can produce a bigger sound.
Why does my violin sound terrible?
There are a few reasons for this: some violinists don’t like hearing any “scratch” or “edge” in the sound under their ear (soloists hear plenty); some don’t realize that when you play closer to the bridge, you need to increase bow pressure, so they hear a “glassy” sound and get discouraged; some have a crooked bow …
How do you EQ low strings?
To help lower strings sit well in the mix then you’ll need to make a boost with a wide Q at around 1kHz to around 6kHz. That will add some crunch, but sweep around that frequency range to find a good spot. To add some presence or clarity a boost around 6kHz to 8kHz will do the trick.
What type of microphone is best for violin?
AKG C 414 XLS condenser microphone: Best sounding condenser mic on violin. Beyerdynamic M 160 ribbon microphone: Best sounding ribbon dynamic mic on violin in studio and live performances. DPA d: dicate 4011C condenser microphone: Best clip-on microphone for violin in studio and live performances.
How do you connect a mixer to a violin?
As per the connection, it is actually quite simple. You will need two jack cables: the first one to connect the electric violin (or pedals) into the input jack of the DI-box, and another one to connect the output jack of the DI into the mix table.
What is violin sound post?
In a string instrument, the sound post or soundpost is a dowel inside the instrument under the treble end of the bridge, spanning the space between the top and back plates and held in place by friction.
How do you make a rich sound on a violin?
5 Ways To Improve Violin Tone
- Bow Pressure. The pressure you apply on the bow affects the tonal quality of your violin.
- Bow Location (Straight Bow) Where the bow makes contact with the strings makes a difference too.
- Rosining.
- Bow Grip.
- Replace your Strings.
Why does my violin sound airy?
Squeaky, Airy, Scratchy & Unclear Sounds These types of sounds indicate bow hair that is not properly gripping and vibrating the strings. The most frequent causes of this issue include: Not enough rosin. Bowing at an angle.
Why does my violin sound muffled?
If you completely remove all of the strings, the subsequent lack of pressure on the top of the violin can cause the Sound Post to slip out of place. If this occurs, high notes will screech and lower tones will be muffled most unpleasantly. Learn how to change your violin strings.
How should the sound post of the violin be positioned?
…The grain lines of the sound post should be oriented from side to side, that is perpendicular to the grain of the top plate. …The sound post needs to be a certain length within +/-0.002″ of the ideal length. When in position and with no string tension, the sound post should stand in position without falling when the violin is gently tipped.
What is the purpose of a Soundpost on a violin?
The soundpost serves as a kind of fulcrum for the top plate so its position influences the action of the plates, the bridge and the strings. With this in mind, you can change to a certain degree the timbre of the violin (and playability).
Can you change the timbre of the violin?
You can now put on a set of strings together with the bridge and try the sound of the violin. The soundpost serves as a kind of fulcrum for the top plate so its position influences the action of the plates, the bridge and the strings. With this in mind, you can change to a certain degree the timbre of the violin (and playability).
What is the best way to adjust the tension on a violin?
A good tip is to squeeze the side of the violin gently at the C bouts to release the sound post if it is wrong positioned, since this reduces the tension between the belly and back at the soundpost position and lets it fall.